100A等离子切割手动使用30mm钢刀CUT-100H
100A等离子切割手动使用30mm钢刀CUT-100H
100A等离子切割手动使用30mm钢刀CUT-100H
100A等离子切割手动使用30mm钢刀CUT-100H
100A等离子切割手动使用30mm钢刀CUT-100H
型号
CUT-100H

属性

额定输入电压
340-460V,3-PH,50-60Hz
额定输出功率
30-100A
最大开路电压
17.8KVA
效率刍议
85%
最大输入电流
340 / 460V,52 / 38A
额定输出电压
120V
占空比@ 40°C(104°F)
60%@ 100A
保证
1年保修
外形尺寸
680X310X650MM
重量
42KG

产品评价

产品描述

  • CUT-100H

    Professional-grade power plasma for cutting 20mm thickness metal @500mm/min

    • Light Industrial Application:

      Home workshop
      Metal workshops
      Light fabrication
      Repair and maintenance
    • These Materials:

      Mild Steel
      Brass
      Stainless Steel
      Copper
      Aluminum
    • Input Power: 340-460V, 3-Phase

      Amperage Range: 30-100A
      Rated Output at 40℃ (104℉):
      100A at @60% Duty Cycle
      Weight: 42KG

       

    Maximum productivity

    Cutting 20mm@500mm/min ensures the maximum pro ductivity(optional torch).

    Finish jobs much faster with cut speeds greater than oxyfuel.

    Spend less time on grinding and edge preparation due to superior cut quality.

    Easy-to-use with versatile design

    Very easy to use, even for first time operators.

    Non-HF type available: Starts without high-frequency so it will not have electromagnetic interfere.

    Tackle different jobs with multiple, easy-to-use torches.

    Easy to work with CNC system.

    Low operating cost

    Reduce costs with long consumable life and more uptime.

    High power efficiency lowers energy consumption.

    Rugged and reliable

    TOPWELL Certified reliability ensures performance in the most demanding environment.

    Powercool design cools internal components more effectively for long system life and improved uptime.

    General View of Control Panel

    • 1.Ammeter/Voltmeter Display

      2.Encoder Control

      3.Mode:2T(STD)/4T(HOLD)

    Non-HF Arc Ignition system

    • Torch off.
    • By pressing the trigger the torch will be fed by the current thus causing a temporary short circuit betweenelectrode and tip.
    • The air then pushes up the small piston, thuscreating, between the electrode and the tip, the distance needed to strike the pilot arc.
    • By positioning the torch on the part to be cut, theplasma arc will strike.
       
       
       
       

    Torches with pilot arc cut in without high frequency.

    Less electromagnetic disturbance, with consequent absence of problems for any electronic, radio, television, telephone and computer systems in the vicinity of the cutting positions.

    Less electric stress on the torch - and on the respective connecting cables - due to the absence of the high voltage necessary for striking the arc Greater simplicity in comparson with other torches(without high frequency) on the market,with a consequent decrease of the risks of jamming in the mechanical pneumatic movement for striking the arc. Subject to wear (electrode, tips, nozzles, diffusers etc.), thanks to the better cooling of the torch obtained by reducing the insulating thicknesses (without endangering the safety parameters).


       

  • Item No CUT-100H
    Input voltages (±15%) 340-460V, 3-PH, 50-60Hz
    Max Input current 340/460V, 52/38A
    Output current 30-100A
    Rated output voltage 120V
    Duty cycle @ 40° C (104° F) 60% @100A
      100% @80A
    Open circuit voltage (OCV) 280V
    Dimensions 680x310x650mm
    Weight 42kg
    Gas supply Air (clean, dry and oil-free)
    Recommended gas inlet flow rate/pressure 0.4-0.6Mpa
    Power supply type Inverter – IGBT
    Electrical efficiency 80%
    Max. Load Power Capacity 17.8KVA
    Certifications CE, RoHS
    Warranty Power supply: 3-year Torch: 1-year
  • ACCESSORIES

    For CNC

    3

      

      

    PLASMA torch: A101P

    Current: 50-100A

    Duty Cycle 60%: 75A

    Gas Pressure: 5.0Bar

    Gas Flow: 180L/min

    Ignition: HF

      


      

      

    PLASMA torch: STM-120

    Current: 40-120A

    Duty Cycle 60%: 120A

    Air pressure: 5.0-6.0Bar

    Gas Flow: 295L/min

    Ignition: Without HF

    For Hand


      

      

    PLASMA torch: A101

    Current: 30-100A

    Duty Cycle 60%: 100A

    Gas Pressure:5.0Bar

    Gas Flow: 180L/min

    Ignition:HF

      


      

      

    PLASMA torch: PT-100

    Current: 30-100A

    Duty Cycle 60%: 100A

    Air pressure: 5.0Bar

    Gas Flow: 200L/min

    Ignition: Without HF

  • Q:Are you a factory or a trading company?

    A: We are factory with more than 10 years manufacturing experience and we provide perfect OEM and after-sale service.

    Q:How can I pay my order?

    A: We accept T/T, Western Union, Alibaba Trade Assurance payments. For those orders less than 1000USD, we accept PayPal to pay.

    Q:How about your warranty?

    A: We offer 3-year product life guarantee ,and a generous 1 year warranty on al purchases that begins with the bill of lading.

    Q: Do you have a CE certificate?

    A: For every model of machine, it has a CE certificate.

    Q:How can I get the quotation?

    A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price,please send the message on trade management or call us directly