HD300W Heavy Duty, Long Life and High Performance Plasma Cutting System
HD300W Heavy Duty, Long Life and High Performance Plasma Cutting System
HD300W Heavy Duty, Long Life and High Performance Plasma Cutting System
HD300W Heavy Duty, Long Life and High Performance Plasma Cutting System
HD300W Heavy Duty, Long Life and High Performance Plasma Cutting System
HD300W Heavy Duty, Long Life and High Performance Plasma Cutting System

HD300W Heavy Duty, Long Life and High Performance Plasma Cutting System

型号
HD300W

属性

Input Voltage
3PH ~ 400V ±15%
Duty Cycle Rating 40℃(105℉)
300A@100%

评价

产品描述

DETAILS
HD300W
Heavy Duty, High Performance, Long Consumable Life Plasma Cutting System

Cutting Capacity
Mild Steel Cut Capacity
Thickness
Production Pierce
40mm
Maximum Cutting Capacity
70mm
Stainless Steel Cut Capacity
Thickness
Production Pierce
32mm
Aluminum Cut Capacity
Thickness
Production Pierce
32mm
High Performance Cutting
• HD300W plasma cutting system cuts fine-feature parts with superior quality and consistency, eliminating the cost of secondary operations.
• The focused plasma arc for more powerful precision cutting up to 40mm on Mild Steel and 32mm on Stainless steel and Aluminum.
• With water spray cutting process, the stainless steel and aluminum cutting will be less warping and produce a small heat-affected zone.
High Performance Cutting
High Performance Cutting
High Performance Cutting
Water Mist Secondary (WMS) Technology
WMS




During the cutting process, the water in the shield stream is divided into its principal components—hydrogen and oxygen. The hydrogen creates a reduced atmosphere in the cut zone, isolating it from contaminants at a much lower cost per metre than other cutting processes. Since it uses normal tap water, Water Mist Secondary also reduces production costs and keeps overall energy usage to a minimum.
Long Consumable Life & Fast Cutting Speed


Long Consumable Life

• 12mm mild steel；
• 200A Air/Air；
• 20s duration;
• The number of consumable starts can reach more than 500 times   (ISO9013 Range 2).
Long Consumable Life
Fast Cutting Speed


Fast Cutting Speed

The cutting speed of dross free can reach 1600mm/min for 20mm mild steel.
Bevel Cutting Technology




Bevel Cutting Technology is a performance application for mild steel. Factory tested and easily implemented, it takes the guesswork out of the plasma bevel-cutting process. With Bevel Cutting Technology, setups for new jobs are quick and results are accurate and consistent.

• 1 iteration
• Using True Bevel
• Acceptable part and ready to start production
Bevel Cutting Technology
Refined Torch System
Refined Torch System



• Double air system torch;
• Nozzle cooling for increased electrode life and reduced operating costs;
• Work with TOPWELL high voltage power source to shift the cutting limitation.

VIDEO

SPECIFICATIONS
Machines
Product Name
HD300W
Cut angle（ISO 9013 range*）
2
Weldability
Ready to weld
Plasma gas
Air
Shield gas
Air; Water Spray
Product Weights & Dimensions
Dimensions(L*W*H)
1000*550*1170mm
Net Weight
220KG
Basic Specification
Input Voltage
380V/400V, 3PH, 50/60Hz
Input Power
75KVA
Rated output voltage
50~200VDC
Rated Output(40℃) 100%
300A
Open circuit voltage (OCV)
430VDC
* ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.
Document

YOU MAY ALSO NEED
TP300 Consumable Kit
TP300 Consumable Kit

关键词