便携式TOPWELL空气等离子金属切割机CUT-40Di
便携式TOPWELL空气等离子金属切割机CUT-40Di
便携式TOPWELL空气等离子金属切割机CUT-40Di
便携式TOPWELL空气等离子金属切割机CUT-40Di
便携式TOPWELL空气等离子金属切割机CUT-40Di
便携式TOPWELL空气等离子金属切割机CUT-40Di
型号
CUT-40Di

属性

额定输入电压
200-240V,1-PH,50-60Hz
额定输出功率
25-40A
最大。负载功率容量
6KVA
效率刍议
80%
最大输入电流
200 / 240V,30 / 25A
占空比@ 40°C(104°F)
60%@ 40A
开路电压(OCV)
280V
保证
1年保修
尺寸
450 * 210 *350​​毫米
重量
12KG

评价

产品描述

  • CUT-40Di

    Professional-grade power plasma for cutting 8mm thickness metal @500mm/min

    • Application:

      Home workshop
      Metal workshops
      Light fabrication,
      Repair and maintenance
    • These Materials:

      Mild Steel
      Brass
      Copper
      Aluminum
    • Input Power: 200-240V, 1-Phase

      Amperage Range: 30-60A
      Rated Output at 40℃ (104℉):
      250A at 26.5V @60% Duty Cycle
      Weight: 12KG

       

    ADVANTAGES

    • Maximum productivity

      Cutting 12mm @500mm/min ensures the maximum productivity (optional torch).

      Finish jobs much faster with cut speeds greater than oxyfuel.

    • Easy-to-use with versatile design

      Very easy to use, even for first time operators.

      Non-HF type available: Starts without high-frequency so it will not have electromagnetic interfere.

      Tackle different jobs with multiple, easy-to-use torches.

    • Low operating cost

      Reduce costs with long consumable life and more uptime.

      High power efficiency lowers energy consumption..

    • Rugged and reliable

      TOPWELL Certified reliability ensures performance in the most demanding environment.

      Powercool design cools internal components more effectively for long system life and improved uptime.

    General View of Control Panel

    • 1.Ammeter/Voltmeter Display

      2.Encoder Control

      3.Gas supply problem

      4.Over heat/Over loading

      5.Power LED

    Non-HF Arc Ignition system

    • Torch off.
    • By pressing the trigger the torch will be fed by the current thus causing a temporary short circuit betweenelectrode and tip.
    • The air then pushes up the small piston, thuscreating, between the electrode and the tip, the distance needed to strike the pilot arc.
    • By positioning the torch on the part to be cut, theplasma arc will strike.
       
       
       
       

    Torches with pilot arc cut in without high frequency.

    Less electromagnetic disturbance, with consequent absence of problems for any electronic, radio, television, telephone and computer systems in the vicinity of the cutting positions.

    Less electric stress on the torch - and on the respective connecting cables - due to the absence of the high voltage necessary for striking the arc Greater simplicity in comparson with other torches(without high frequency) on the market,with a consequent decrease of the risks of jamming in the mechanical pneumatic movement for striking the arc. Subject to wear (electrode, tips, nozzles, diffusers etc.), thanks to the better cooling of the torch obtained by reducing the insulating thicknesses (without endangering the safety parameters).


       

  • Item No CUT-40Di
    Input voltages (±15%) 200–240V, 1-PH, 50-60Hz
    Max Input current 200/240V, 30/25A
    Output current 20-40A
    Rated output voltage 96V
    Duty cycle @ 40° C (104° F) 60% @40A
      100% @25A
    Open circuit voltage (OCV) 280V
    Dimensions 410x185x310mm
    Weight 12kg
    Gas supply Air (clean, dry and oil-free)
    Recommended gas inlet flow rate/pressure 0.3-0.5Mpa
    Power supply type Inverter – IGBT
    Electrical efficiency 80%
    Max. Load Power Capacity 6KVA
    Certifications CE, RoHS
    Warranty Power supply: 3-year Torch: 1-year
  • ACCESSORIES
    3

      

      

    PLASMA torch: CB50

    Current: 50A

    Duty Cycle 60%: 50A

    Gas Pressure: 4.5 5.0Bar

    Gas Flow: 120L/min

    Ignition: HF


      

      

    PLASMA torch: Trafimet S45

    Current: 50A

    Duty Cycle 60%: 40A

    Air pressure: 5.0Bar

    Gas Flow: 115L/min

    Ignition: Without HF


      

      

    PLASMA torch: PT40

    Current: 40A

    Duty Cycle 60%: 40A

    Gas Pressure: 5.0Bar

    Gas Flow: 100L/min

    Ignition: Without HF

  • Q:Are you a factory or a trading company?

    A: We are factory with more than 10 years manufacturing experience and we provide perfect OEM and after-sale service.

    Q:How can I pay my order?

    A: We accept T/T, Western Union, Alibaba Trade Assurance payments. For those orders less than 1000USD, we accept PayPal to pay.

    Q:How about your warranty?

    A: We offer 3-year product life guarantee ,and a generous 1 year warranty on al purchases that begins with the bill of lading.

    Q: Do you have a CE certificate?

    A: For every model of machine, it has a CE certificate.

    Q:How can I get the quotation?

    A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price,please send the message on trade management or call us directly